We could put a 48VDC to 12VDC power supply on the output of each channel
of the Morningstar relay driver. Are there physically small and
inexpensive 48VDC to 12VDC power supplies available?
Thanks,
Drake
On 2026-07-21 11:52, Jay via RE-wrenches wrote:
I haven't found what you're looking for. But lots of 48vdc voltage
controlers with relay and then I'd get a 48-12v power supply for
your 12v loads.
Not so elegant but functional
Jay
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
