Hello,
The Morningstar relay driver is a great device. It can measure 48VDC
nominal and operate relays based on the measured voltage. The problem is
that, if it is measuring 48VDC nominal, it outputs the same.
Is there anything besides a charge controller that can measure 48 VDC
nominal and put out a small 12VDC current? The 12VDC output of an
Outback or Midnite charge control is perfect.
If a relay driver, with several channels, could do this, it would be a
very useful device. Does anything like this exist?
Thanks,
Drake
_Drake Chamberlin_
_Athens Electric LLC_
_Ohio Electrical Contractor's License 44810_
_NABCEP Certified PV Installation Professional_
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
