I’ve seen low amperage ones for under $20. Amazon.
> On Jul 21, 2026, at 7:31 PM, Drake Chamberlin via RE-wrenches > <[email protected]> wrote: > > > We could put a 48VDC to 12VDC power supply on the output of each channel of > the Morningstar relay driver. Are there physically small and inexpensive > 48VDC to 12VDC power supplies available? > > Thanks, > > Drake > > >> On 2026-07-21 11:52, Jay via RE-wrenches wrote: >> I haven’t found what you’re looking for. But lots of 48vdc voltage >> controlers with relay and then I’d get a 48-12v power supply for >> your 12v loads. >> >> Not so elegant but functional >> Jay >> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
