Hi Karen,
is it 10.4.7 und Keyspan 2.1 ?
till 10.4.6 and Keyspan 2.0 the world was ok, my application worked well
and now since 10.5.7 I get scrambled bytes
under OS9 Emulation it's ok
Roland
Am 09.08.2006 um 22:15 schrieb [EMAIL PROTECTED]:
On Win2k I have the serial output of a piece of equipment equipment
connected to Com1 and amd trying to read it via the serial control,
but I seem not to be getting anything. It's been about 15 years
since I played with thins kind of stuff so I may be missibg something.
I've got the instrument and serial port configured the same way
witj regard to baud rate, DataBits, parity and FlowControl as far
as I can tell. Until I matched them teh instrument woudl not send
data and it does now... But I don't get anything from the serial
control.
In Window open:
Serial1.SerialPort=System.SerialPort(0)
MsgBox Serial1.SerialPort.Name ' Shows COM1
If Not Serial1.Open Then MsgBox "Can't Open Port" ' does not come up
In Event Serial1.DataAvailable:
EditField1.Text=EditField1.Text+ Me.ReadAll()
In Event Serial1.Error
MsgBox "error: " +Str( me.LastErrorCode)
When I transmit data from the insrument (it says it sent 15 lines)
nothing shows up in the editfield but neither does the error event
fires
BTW same thing happens in Hyperterm when I set the port parematers
the same way...
What am I missing?
Thanks
- Karen
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
