Thanks to all for the suggestions... I'm not at work today but will
work on it more tomorrow...
It should not be the cable, i was told the cable I was given is
straight through not Null Modem and the equipment manufacturer said
that is what I needed...
BTW the cable is DB-9 , female on both ends. Maybe it's not what I
was told or is bad? Don't have a brakeout box but I can get my hands
on a meter.
Thanks,
-Karen
On Aug 9, 2006, at 5:53 PM, David Graham wrote:
Karen,
Your code looks fine. If data really is coming in, it sounds like a
hardware problem. You could have a bad connection that allows
sending data,
but not receiving it, if the receive wire is not connected. Check
your cable
with an ohm meter to make sure you have continuity from pins 2-2,
3-3 and
5
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
