On Feb 12, 2007, at 12:25 AM, Guyren Howe wrote:
On Feb 12, 2007, at 1:15 AM, Giovanni wrote:
I understand that, but depending on the sharing setup you have,
you may want to check your type of networking VMWare is doing. In
the default setup it uses sharing internet instead of retrieving
an IP from your router.
We had some problems with the share internet connection setting in
vmware.
It's in bridged mode, and successfully getting a DHCP lease that's
different from the host OS.
Would you elaborate on "you may want to check your type of
networking VMWare is doing" (check that it's doing what?) and "We
had some problems with the share internet connection setting in
vmware" (choices are NAT and bridged -- which did you have problems
with and what were they?).
Most important of all, for me and anyone who might subsequently
read this: how did you get it to work?
Have you selected a specific interface in the IDE to try and find
remote stubs ?
I've run into this issue from time to time where remotes cannot be
found if I leave the IDE set to default.
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives:
<http://support.realsoftware.com/listarchives/lists.html>
