I have now successfully connected to a region (attached to osgrid) running on my pc , so my patch does work, in grid mode, but appears to have inventry issues with standalone mode. sorry the test took so long, but when i went to do it first osgrid was down for maintanance
----- Original Message ----- From: "Gustavo Alberto Navarro Bilbao" <[email protected]> To: <[email protected]> Sent: Tuesday, March 10, 2009 11:07 AM Subject: [realXtend] Re: running rex 0.4 behind Network adress translation (NAT) I don't know if this can help, but in our hired host, changing in authentication\HttpSettings.xml the adress to the private IP´s, we can get be identificated. If we configure the adress with the public IP, is impossible. (waiting for the viewer wiyh the Peter's patch ;-D ) ----------------------------------------------------------------------- 2009/3/9 Peter Tavinor <[email protected]>: > I dont quite understand what you are on about, > If im not mistaken this is that it is > > You are trying to run a region server on you lan attached to a grid server > on the internet > when you try to connct you loose comunication between your region server > and > the viewer, > > if that is the case the reason is because after contact the region server > or > the grid server sends the external ip address to the viewer, > then the viewer sends the IP packets to your external IP address , this > causes them to get dropped if your router dosnt support loopback > > There is no solution for this that i have been able to find, > But there is good news, I have been working on a Patch to do Nat > Translation > in the Viewer (realXtend Viewer) It still needs a lot of testing > I have attached a copy of the .Diff file for revision 1073 of realXtend > viewer, The NAT extention can be found on the Network Tab of the > Preferences > Set the Source IP and Port to your Externat IP and Port, and set the > Desternation IP and Port to yout Internat IP and Port , then hope it works > there is currently no documentation at this stage, > > > > ----- Original Message ----- > From: "Ralf Haifisch" <[email protected]> > To: "realXtend" <[email protected]> > Sent: Sunday, March 08, 2009 11:09 PM > Subject: [realXtend] running rex 0.4 behind Network adress translation > (NAT) > > > > Hi all, > > is anyone running a rex 0.4 on windows with NAT on a hosted server ? > > - server sits with private IP´s a la 19.2168.x.y > - domain points to official IP 85.86.86.88 > - the viewer accessing is on a DSL with a NAT-router, as well NOT > shareing the IP-net used for the server > > Problem seems to be the avatarstorage server. If your set > rex_authentication = False (so basicly use the rexserver only), it > works with no problem. > > Very common situation for running pure opensim. > > > But if you set rex_authentication = True, the rexserver gets stuck > after initial account verification. > > > If anyone has experience with that, would be helpful. > > > Cheers, > Ralf > > > > > --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
