->>> If I had router that supports using external ip from lan, then I should be ok anyway? yes that is correct.
->>>If you have your realxtend region connected to osgrid, can you use 3D meshes, No, only sculpted prims ->>>how is osgrid rendered, and avatars? not sure what you mean by this ----- Original Message ----- From: Jani Pirkola To: [email protected] Sent: Monday, March 16, 2009 4:52 AM Subject: [realXtend] Re: running rex 0.4 behind Network adress translation (NAT) Peter, your patch sounds truly interesting. Some questions: - If I had router that supports using external ip from lan, then I should be ok anyway? (I know many people don't have such a router) - If you have your realxtend region connected to osgrid, can you use 3D meshes, and how is osgrid rendered, and avatars? Jani 2009/3/15 Gustavo Alberto Navarro Bilbao <[email protected]> In spanish we say" no importa la espera si vale la pena" some like "doesn't matter how long is the is worth what you get" (somebody says: "Does not matter if the woman waiting is very pretty"). The NAT is really a problem. Just today I configured en modrex service in our public server, for test using the realxtend public identification (http://users.realxtend.net/rexauth/Register.aspx) but I can't get than it works in my PC because the NAT. The other limitation is the size of the meshes than we can upload, because the bandwidht and memory limitations. I get uplad the Red Gate than you can see but not the palace. A pity because if I would get than my local modrex was accesible outside, with the link-region option I could connect the modrex from the server with the mine, and could move meshes between both. Waiting for your patch and thanks for your work. 2009/3/15 Peter Tavinor <[email protected]>: > > I have now successfully connected to a region (attached to osgrid) running > on my pc , > so my patch does work, in grid mode, but appears to have inventry issues > with standalone mode. > sorry the test took so long, but when i went to do it first osgrid was down > for maintanance > > > ----- Original Message ----- > From: "Gustavo Alberto Navarro Bilbao" <[email protected]> > To: <[email protected]> > Sent: Tuesday, March 10, 2009 11:07 AM > Subject: [realXtend] Re: running rex 0.4 behind Network adress translation > (NAT) > > > > I don't know if this can help, but in our hired host, changing in > authentication\HttpSettings.xml the adress to the private IP´s, we can > get be identificated. If we configure the adress with the public IP, > is impossible. > > (waiting for the viewer wiyh the Peter's patch ;-D ) > > ----------------------------------------------------------------------- > > 2009/3/9 Peter Tavinor <[email protected]>: >> I dont quite understand what you are on about, >> If im not mistaken this is that it is >> >> You are trying to run a region server on you lan attached to a grid server >> on the internet >> when you try to connct you loose comunication between your region server >> and >> the viewer, >> >> if that is the case the reason is because after contact the region server >> or >> the grid server sends the external ip address to the viewer, >> then the viewer sends the IP packets to your external IP address , this >> causes them to get dropped if your router dosnt support loopback >> >> There is no solution for this that i have been able to find, >> But there is good news, I have been working on a Patch to do Nat >> Translation >> in the Viewer (realXtend Viewer) It still needs a lot of testing >> I have attached a copy of the .Diff file for revision 1073 of realXtend >> viewer, The NAT extention can be found on the Network Tab of the >> Preferences >> Set the Source IP and Port to your Externat IP and Port, and set the >> Desternation IP and Port to yout Internat IP and Port , then hope it works >> there is currently no documentation at this stage, >> >> >> >> ----- Original Message ----- >> From: "Ralf Haifisch" <[email protected]> >> To: "realXtend" <[email protected]> >> Sent: Sunday, March 08, 2009 11:09 PM >> Subject: [realXtend] running rex 0.4 behind Network adress translation >> (NAT) >> >> >> >> Hi all, >> >> is anyone running a rex 0.4 on windows with NAT on a hosted server ? >> >> - server sits with private IP´s a la 19.2168.x.y >> - domain points to official IP 85.86.86.88 >> - the viewer accessing is on a DSL with a NAT-router, as well NOT >> shareing the IP-net used for the server >> >> Problem seems to be the avatarstorage server. If your set >> rex_authentication = False (so basicly use the rexserver only), it >> works with no problem. >> >> Very common situation for running pure opensim. >> >> >> But if you set rex_authentication = True, the rexserver gets stuck >> after initial account verification. >> >> >> If anyone has experience with that, would be helpful. >> >> >> Cheers, >> Ralf >> >> >> > >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
