We used an audio track to test so we couldnt notice audio sync problems, Will try this later and report at Jira and Here
Regards Rodrigo O -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ivan Eyara Sent: Miércoles, 11 de Julio de 2007 02:34 p.m. To: [email protected] Subject: Re: [Red5] Insufficient BW, or clientconfig?(Doesthisworkforanyone? - strange; bigger is better) I did some more testings using Red5 0.6.2: Streaming software: On Flix 8.0.2.0. Settings: 128kbps Video qualiy is good, as if I was using Flash Media Server. No insufficiente BW warining. But the audio is not sync. More or less, it is 2 seconds late. Streaming software: On Flix 8.0.2.0. Settings: 256kbps. Video quality is good. No insufficiente BW warining. Audio is not sync, but is better than using the 128kbs stream Streaming software: On Flix 8.0.2.0. Settings: 512kbps. Video quality is good. No insufficiente BW warining. I would say that audio is sync, although I'm not 100% sure I see this message in the Red5 log, but I don't know if it is related to this problem: "Skipping message with negative timestamp" I my past tests I didn't realize the audio problem because I was not using audio. Ivan ----- Original Message ----- From: "Rodrigo Ordonez Licona" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, July 11, 2007 1:25 PM Subject: Re: [Red5] Insufficient BW, or client config?(Doesthisworkforanyone? - strange; bigger is better) > We had to do some tweaking at the Transmitting machine. > > However we were able to make a Nice stream test on a local network > with 100mbps switches, > > Red5 is sitting on a linux machine, and both of the clients were > Windows, > > > Regards > > Rodrigo O > Xnet > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Ben H Kram > Sent: Martes, 10 de Julio de 2007 08:36 a.m. > To: [email protected] > Subject: Re: [Red5] Insufficient BW, or client config? > (Doesthisworkforanyone? - strange; bigger is better) > > Using 8.0.2.0, streaming 256kbps, I see these occasionally on the > client > side: > > code : NetStream.Play.InsufficientBW > clientid : 1 > description : Data is playing behind the normal speed. > level : warning > details : live > > This is over a gigabit connection. > > On Mon, Jul 09, 2007 at 06:45:08PM -0400, Ivan Eyara wrote: >> I've just been streaming for more than 20 minutes and the log doesn't >> show > any insufficient BW warning. Flix is 8.0.2.0 version and I've been > using the Broadband Med - 256kbps settings. >> >> Ivan > -- > Benjamin H Kram > [EMAIL PROTECTED] > 617.998.8592 > > _______________________________________________ > Red5 mailing list > [email protected] > http://osflash.org/mailman/listinfo/red5_osflash.org > > > _______________________________________________ > Red5 mailing list > [email protected] > http://osflash.org/mailman/listinfo/red5_osflash.org > _______________________________________________ Red5 mailing list [email protected] http://osflash.org/mailman/listinfo/red5_osflash.org _______________________________________________ Red5 mailing list [email protected] http://osflash.org/mailman/listinfo/red5_osflash.org
