I think this is a problem with glint, go to the RH 5.1 errata and upgrade
the glint rpm, pretty sure that'll fix it. I had simila problem and it's
been posted numerous times.
Steve
Steve Smith
National Renewable Energy Laboratory
1617 Cole Blvd /|\
Golden, CO 80401 *
* *
<--* *--> NREL
* *
Phone: (303)384-6625 *
FAX: (303)384-6604 \|/
email: [EMAIL PROTECTED]
http://nsom.eecs.umich.edu/~steve/
On Mon, 15 Jun 1998, Matt W. wrote:
> OK... I just installed RH5.1 on my box. But I cannot use the RPM Manager
> in Xfree. I start up the manager and select 'Available'. It starts to
> scan the CD it gets to about 90% and stops scanning. I don't understand!
> I have tried this on 3 different CDs. I even coppied a RPM from the CD
> to the HD and tried it that way. When I hit 'Available' it did not move
> at all. Yes I did change in the config where to look. And the CD drive
> mounts fine!
>
> Specs (probably wont help)
> p166 with 96M
> 8x CDROM ATAPI (it mounts perfectly fine)
>
> Thank you!!!
>
> Matt W.
> [EMAIL PROTECTED]
>
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
