On Mon, June 15, 1998 at 22:16:35 -0400,
Rick knebel <[EMAIL PROTECTED]> is thought to have said:
>At 06:20 PM 6/15/98 -0800, you wrote:
>>"Matt W." <[EMAIL PROTECTED]> wrote:
>>> OK... I just installed RH5.1 on my box. But I cannot use the RPM Manager
>>> in Xfree. I start up the manager and select 'Available'. It starts to
>>> scan the CD it gets to about 90% and stops scanning. I don't understand!
>>> I have tried this on 3 different CDs. I even coppied a RPM from the CD
>>> to the HD and tried it that way. When I hit 'Available' it did not move
>>> at all. Yes I did change in the config where to look. And the CD drive
>>> mounts fine!
>
>There is an update to glint on the redhat site that fixes this problem.
I had this problem using the updated glint yesterday. I ran glint
from the command line so I could see any errors and it turns out the
update directory contained a subdirectory (jpeg) and that is where it
hung during the scan. I simply copied the *.rpm files to another
directory and installed from there.
This was running glint 2.6.2.
Jim
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
