> couple problems i am running into with this new install.  first try
> through the first boot after install it would keep hanging on loading
> sendmail.  i tried various things to stop it from loading but could not
> get it done so i ended up doing a complete reinstall and told the
> services section not to load sendmail this time.  Now it's hanging on
> smbd !!  yes, i am going to want some of the services samba offers.  How

Unfortunately its a bug.  Add your hostname to /etc/hosts and you should
be fine.

> (irq5 is taken by the nic and i can't find the disk to change it)

Depending on the card, there is likely a linux program to change the
interrupts.

> when the system boots it says com 1 and 3 are both on 4...  is there
> something i can do to get around this?  this system is supposed to run 2
> modems simultaneosly.  

Add the following to the end of /etc/rc.d/rc.local:

/bin/setserial /dev/ttyS2 irq 7

Dave





-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to