On Fri, 10 Apr 1998, Dave Wreski wrote:
>
> > couple problems i am running into with this new install. first try
> > through the first boot after install it would keep hanging on loading
> > sendmail. i tried various things to stop it from loading but could not
> > get it done so i ended up doing a complete reinstall and told the
> > services section not to load sendmail this time. Now it's hanging on
> > smbd !! yes, i am going to want some of the services samba offers. How
>
> Unfortunately its a bug. Add your hostname to /etc/hosts and you should
> be fine.
>
> > (irq5 is taken by the nic and i can't find the disk to change it)
>
> Depending on the card, there is likely a linux program to change the
> interrupts.
If you can find the card manufacturers' web site most likely they will
have the files you need to download to change the nic. You'll probably
need a dos boot disk to run the program though. I was able to do that
with my cheap ne2k nic.
>
> > when the system boots it says com 1 and 3 are both on 4... is there
> > something i can do to get around this? this system is supposed to run 2
> > modems simultaneosly.
>
> Add the following to the end of /etc/rc.d/rc.local:
>
> /bin/setserial /dev/ttyS2 irq 7
>
> Dave
>
>
>
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*
Pat Hennessy ! <[EMAIL PROTECTED]>
!
! http://www.magpage.com/~path/
*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
