The other posts, of course, were read after my reply. <shrug> It happens.
On Sat, 6 Jul 2002, Ashley M. Kirchner wrote: > Mike Burger wrote: > > > Like I said, ifconfig: > > You need to follow the thread and read my other posts. The card isn't there >yet. It needs to be configured. The system does not SEE it. ifconfig does me no >good without the card being recognized and loaded. And modprobing the module results >in errors because it's not finding the card. So I needed to find the card's physical >configuration, and if needed, change it. > > This is a moot point now since I found the tools to do it at >http://www.scyld.com/diag/ and the card is now up and running. It was configured as >0x210 with IRQ 10, and the module wasn't finding it. Changing it to 0x300, same IRQ >works. Last I checked, ifconfig was not able to change NIC parameters (something I >said over and over again, I need to find out what they are AND/OR CHANGE them). > > -- > H | "Life is the art of drawing without an eraser." - John Gardner > +-------------------------------------------------------------------- > Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130 > Director of Internet Operations / SysAdmin . 800.441.3873 x130 > Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave, #6 > http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A. > > > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
