What speed is your serial port set at? You can find out using the setserial
command. i.e. "setserial /dev/ttyS?" or "setserial /dev/modem".
In a message dated 98-06-24 05:20:34 EDT, you write:
<< 'm having a few problems with my packard bell sound. I can only get
connected at 9600. After noticing this problem in the messages log, I
checked out the manual. I can get on reliably at 28.8/31.2 in NT on
this same system, so I know it's not the modem. I'm using redhat 4.1
with kernel 2.0.34 and pppd 2.2.4. The modem is call the Packard Bell
Sound II 33.6, the manual I am consulting is for the 28.8 version since
that's what my computer came with. The command string I'm using
currently is:
>>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
