I would set up the 90 and mix all new water with all pumps running.
Then 3 or 4 days later swap about 50% of the water out of the
30 wait a few days and then do it again. Then I would proceed
to start setting up the 90 with any new live rock, sand etc.
then once that has cured ,which should not be a long, I would
tranfer any items from the 30.
--- Original Message ---
[EMAIL PROTECTED] Wrote on
Tue, 1 May 2001 23:30:07 EDT
------------------
Hey folks,
I am upgrading from a 30 gallon to a 90 gallon. I want to try
to do this
with as minimal cycle as possible in the 90 gallon. The tanks
can be set up
and run at the same time as they will be in different locations.
Any
suggestions on how to do this quickly without creating a mess
or dead
animals.
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you
from the list. The list manager controls who belongs to the
list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
-----
Sent using MailStart.com ( http://MailStart.Com/welcome.html )
The FREE way to access your mailbox via any web browser, anywhere!
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
