Re: [Repeater-Builder] Identify an high Split master Pa ??

[Lee Williams]

The two blue pots are for setting the power control protection circuit and needs to be tuned to the procedure in the manual. If this is a continuous duty pa,it has two air variable capacitors on the tuneable output filter which also should be tuned according to the book. Mis-adjusting them will cause problems. A manual is a must-have !    73,Lee,N3APP ----- Original Message ----- From: gervais,ve2ckn To: Repeater-Builder@yahoogroups.com Sent: Tuesday, November 25, 2003 8:00 PM Subject: [Repeater-Builder] Identify an high Split master Pa ?? hi, i install a pa on a Master 2 repeater Low Split Vhf of 105 watts output, i have try to balance de pa and when we begin to tune the 2 potentiometer for the matching of impedance of the natenna we hear a tone FROM the transmit audio of the Master 2. The duplexer ,6 cans Dodge is in excellnt state and tune at more of 100 db reject ,receiver and transmetter of the Master 2 are well  tune . So i am beginning to suspect the Pa,where should i look to know if this is in fact an HIGH SPLIT PA .   thanks for the info,if you have any picture on the parts that would confurm a LOW SPLIT PA send it to me   73/s gervais,ve2ckn Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.