Derek, take a look at these antennas: http://www.bluewaveantenna.com/products/summit_extreme.html
Just what you need for those little hills in western NC :-) good luck John, N4SJW --- In [email protected], "Derek B. McIntyre" <[EMAIL PROTECTED]> wrote: > Looking for input on heavy duty 2 meter antennas for repeater use at > a remote location with very high winds and extreme ice in the > winter. I am planning to install a VHF repeater on a mountaintop > where these conditions exist within the next few months. Conditions > include sustained winds up to 100 MPH, gusts reported during winter > months up to 160 MPH.. Temperatures falling well below zero F and > rime ice, radial ice up to several inches. > > The antenna must be self supporting, ie, no top sway brace. I am > particularly interested in hearing additional comments on ice > acumulation on folded dipoles (and the effects) and if the common > consensus leans toward fiberglass antennas in this environment. > Lightning strikes probably won't be an issue because there is a 500 > foot tower within a rock throw of my antenna location near ground > level. > > I have been leaning towards the Decibel DB-222 but can't find one for > the 146 MHz range. I have also checked on the Celwave PD-440 and am > pleased with the specs. Does anyone have any comments on the Hustler > spirit 3 or 6 dB models? The pattern can be offset or omni, still > haven't determined my desired coverage area. Need advice from > serious mountain toppers who have repeater systems surviving harsh > winters. > > Thanks, > Derek KC4FWC. Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

