A few years ago I was given an antenna that was specifically designed for extreme weather environments. It had iced up so badly it broke the clamps that held it to the tower and came down approx. 150 feet and lodged itself in the snow at the tower base. The only damage it had was a broken lightning rod off the top and the feedline coax had pulled out of the mast.
This thing is built to take anything. The mast is made of 4" diameter aluminum tubing with a 3/8" wall thickness. The mast is 8 feet long. The configuration is two folded dipole elements on opposing sides of the mast (omni-directional pattern). The supports for the elements are WELDED to the mast. The elements are made from 1" diameter thick wall aluminum tubing and are bolted to the supports with 3/8" bolts. To keep the elements from being damaged by ice they each have two insulated spacers, one at the top and one at the bottom that keep the tubing in line. I managed to get the thing apart and was able to repair the broken feedline. I put it back together and it worked well for the next couple of years until we had to take it down due to eviction by our landlord. The installation was on a mountain top in northern British Columbia at approx. 4,000 feet with lots of icing. At times, that antenna was at least four feet in diameter from the ice build-up. I recently donated it to another ham club here in BC. I have tried to find out the model number of that antenna for quite some time with no success. Apparently, it was made by order only and was not a stock catalog item. You could try talking to Sinclabs (Sinclair) and see if they still make it and what the price would be. Probably very expensive especially if it's built by special order only. May well be worth the $$$ if bad weather is the norm. Doug VA7DD Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

