> --- In [email protected], "Derek B. McIntyre" 
> <[EMAIL PROTECTED]> wrote:
> 
>>Looking for input on heavy duty 2 meter antennas for repeater use 
> 
> at 
> 
>>a remote location with very high winds and extreme ice in the 
>>winter.  I am planning to install a VHF repeater on a mountaintop 
>>where these conditions exist within the next few months.  
> 
> Conditions 
> 
>>include sustained winds up to 100 MPH, gusts reported during winter 
>>months up to 160 MPH..  Temperatures falling well below zero F and 
>>rime ice, radial ice up to several inches.
>>
>>The antenna must be self supporting, ie, no top sway brace.  I am 
>>particularly interested in hearing additional comments on ice 
>>acumulation on folded dipoles (and the effects) and if the common 
>>consensus leans toward fiberglass antennas in this environment.  
>>Lightning strikes probably won't be an issue because there is a 500 
>>foot tower within a rock throw of my antenna location near ground 
>>level.
>>
>>I have been leaning towards the Decibel DB-222 but can't find one 
> 
> for 
> 
>>the 146 MHz range.  I have also checked on the Celwave PD-440 and 
> 
> am 
> 
>>pleased with the specs.  Does anyone have any comments on the 
> 
> Hustler 
> 
>>spirit 3 or 6 dB models?  The pattern can be offset or omni, still 
>>haven't determined my desired coverage area.  Need advice from 
>>serious mountain toppers who have repeater systems surviving harsh 
>>winters.
>>
>>Thanks, 
>>Derek KC4FWC.
> 

Another one to check out is Scala/Kathrein. They have been making LMR, 
broadcast, and government antennas for quite some time.
The CDV-150 folded dipole and the HDB-155 dipole have a wind survival 
rating of 130mph.

http://www.kathrein-scala.com

I do not recommend the Hustler antennas for an extreme environment like 
yours.
For dipole arrays, I would look for something with the phasing harness 
INSIDE the mounting mast, rather than outside.
Also, since it sounds like you will be at a very high altitiude, you 
won't need higher gain, and low gain antennas (<3-4 dBd) will be 
smaller, and therefore more mechanically stable.

-- 
Jim




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


Reply via email to