Why not get a Kenwood TK-880 ( I think ) --- a kenwood mobile radio that is fleetsync capable. You can then use another fleetsync moble or portable to sent a specific fleetsync code to turn off the repeater and another fleetsync code to turn it back on. The radio at the repeater site would control a relay, which would break the path of the COR on the repeater. This will allow the repeater to identify yet - to keep it legal rather than breaking the PTT path.
Best yet is the fact that you can have a seperate control channel... so if some moron wants to use a KW amp under the repeater site to cause mayhem, you still can kill the repeater on the seperate control channel rather than fighting with the offending signal on the input frequency. Using fleetsync - it just sounds like a small burst of white noise for a split second... thats all it takes to turn it on or off. No DTMF that anyone and everyone can decode no matter how fast you key it or use an autodialer.... no "unpublished" pl or DPL tones - those can be found also... Fleetsync, push a button to select what you want to do, press the ptt and just throw your callsign out - the fleetsync code just went out and you identified your transmission - thats all. Dave N9NLU --- kg4yti <[EMAIL PROTECTED]> wrote: > Looking for Good Ways to Turn on and off a Repeater by remote. > This is what I want to do,I want to use the Repeater COR and or RX > Audio to make a relay make and break the PTT path so the repeater > will not key. I do not want put a Repeater Controller on the > Repeater. I would Appreciate any ideas thanks. > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
