3RS is a good marking for a SMT device. This is a GaAs-N-FET made by Matsushita Denshi Kogyo Co. It is in a SOT-143 package and is of type 3SK184-S. I was unable to find a source of these with Google. I did find that these were a common transistor and also used by Icom and Alinco. These were a high failure Item.
Wish you luck and happy hunting. 73 Glenn WB4UIV At 02:21 PM 01/03/04 -0600, you wrote: >Does anyone have the service manual for the Kenwood 701A dual band mobile. >I just fixed one by changing the 440 front end fet with the 144 front end >fet (they are both the same)....my buddy really just needed his UHF side >working. But I would like to replace the bad fet (now in the 2 meter side) >with a new one. The markings on it only say 3RS and nothing more. > >Thanks in advance. > > >Gregg R. Lengling, W9DHI, Retired >Administrator http://www.milwaukeehdtv.org >K2/100 S#3075 KX1 S# 57 >Politics is the art of appearing candid and completely open, while >concealing as much as possible. -States: The Bene Gesserit View > > > > > > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
