If I recall the 12 pin plug on my old 520 was the same plug as on some of
the Reel to reel tape machines at the radio station where I worked. The
machines were MCI, Otari or Ampex, with my best guess being the Otari for the
remote control connections.
Since so many radio stations no longer use the reel to reels, you might find
some of the plugs in the local radio station's junk boxes. Can't hurt to ask.
I'll check my junk boxes at work Monday.
Bill Croghan, CPBE, WB0KSW
Chief Engineer,
KOMP/KXPT/KENO/KBAD
Lotus Broadcasting, Las Vegas, NV
----- Original Message -----
From: "aiken" <[EMAIL PROTECTED]>
To: <[email protected]>; <[EMAIL PROTECTED]>
Sent: Saturday, January 03, 2004 9:12 PM
Subject: Re: [Repeater-Builder] Off topic questions
Adam, the connectors for the power cords on my old 520 is a Jones Socket
(female). Now made by GC/Waldom.
The P/N SHOULD be S-312-CCT. That P/N is NOT shown in my 2002/2003 Allied
Catalog but the mating plug is shown, P-312-CCT.
I suggest you give them a call; 800 433 5700. They recently came up with some
power transistors for our 25 year old church mixing board. Also check the
Digi-Key web page. <www.digikey.com>
Regards,
Lou Aiken, LaMer LLC
27109 Palmetto Drive
Orange Beach, AL
36561 USA
tel ++ 1 251 981 6786
fax ++ 1 251 981 3054
Cell ++ 1 251 979 4648
----- Original Message -----
From: Adam T. Liette
To: [email protected]
Sent: Saturday, January 03, 2004 4:41 PM
Subject: Re: [Repeater-Builder] Off topic questions
When looking for the connector for the AC/DC in on my TS-520, the gal informs
me they don't carry the Jones (I think) plug. However, she tells me she can sell
me one of those "adapter thingys." I was making a DC cable, so of course, she
points out the inverters.
No Thanks.
N8YD
Mike Morris wrote:
"You've got questions, we've got answers!"
Yeah, most of them wrong, or "it's out of stock", or "we don't carry
that any more"
Mike
At 01:35 PM 1/3/04 -0800, you wrote:
The better question is 'Would anyone at Radio Shack have a clue?'
Neil
Chuck Kelsey wrote:
Gregg -
This is obviously a Radio Shack part "3RS."
ANY Radio Shack sales clerk should be able to help you.
......... I just couldn't resist. I suppose I should apologize to
anyone out
there who works at Radio Shack, but would they understand?
Chuck
WB2EDV
----- Original Message -----
From: "Gregg Lengling" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, January 03, 2004 3:21 PM
Subject: [Repeater-Builder] Off topic questions
The markings on it only say 3RS and nothing more.
Thanks in advance.
Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Politics is the art of appearing candid and completely open, while
concealing as much as possible. -States: The Bene Gesserit View
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
b.. To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
