also i have a wavetek 3000b service monitor if i can get it back working a1 would it be suitable or would i have to get a tracking gen Thank you Ian Wells Kerinvale Comaudio mail service 1017, Biloela,4715. www.kerinvalecomaudio.com.au [EMAIL PROTECTED] ----- Original Message ----- From: "nj902" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 19, 2004 12:07 PM Subject: [Repeater-Builder] Re: hp plug ins
> --- In [email protected], "ian wells" <[EMAIL PROTECTED]> > wrote: > "...i have a hp 182t display.can anyone sugest which would be the > best plug in to allow me to align duplexers and cavities..." > __________________________________________________________________ > > The 8558B spectrum analyzer plug in would be an excellent choice. > You can use it to measure over the air signal levels, check > transmitter purity, look for interference, etc. > > You would also need the 8444A opt 059 tracking generator [external] > to create a complete stimulus-response system for aligning filters, > duplexers, etc. The system will have a dynamic range in excess of 90 > dB. and cover from 0.5 to 1500 MHz. > > > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
