Hi,
   Consider a crossbanded MASTR II mobile for your remote sites, and use 
the receiver for the main site.

   Start with a VHF and a UHF MASTR II.  Put the UHF transmitter into the 
VHF radio and duplex that radio.   This will be your remote receiver and 
link transmitter.  Take the remaining UHF receiver and use that as your 
link receiver.

   Besides the obvious benefit of using the nearly bombproof MASTR II 
receivers, your remote sites will benefit from using a single package for 
all the RF.

   Jeff.

At 01:52 PM 3/12/2004, you wrote:
>Hi All,
>
>Rather than reinvent the wheel, a couple of our club members want to 
>experiment with a remote receive site.  To start they are going to play 
>with a dual band radio, receiving on VHF and relaying on UHF.  The 
>ultimate plan will be to have a voter (LDG RVS-8 most likely)
>
>The question I have is this.  Is there a good, inexpensive UHF radio (like 
>a Moxy, or Maxar, etc.) that is easy to interface to a voter, cheap with 
>channel elements or crystals, doesn't take a rocket scientist to move to 
>the ham bands, with a PL deck that will strip the PL tone off the link 
>audio ... that someone has experimented with and is currently using with 
>good results?
>
>Any good articles out there, on any of the builder sites?
>
>I have avoided this subject with our Club members because I didn't want to 
>create a monster REPEATER, (KISS) so I ask and duck for cover!
>
>Thanks all!
>Brian, WD9HSY
>
>PS for those who will ask the current repeater is a 60 Micor VHF 
>Standalone with a Scom 7k controller.
>
>
>
>
>
>
>
>
>----------
>Yahoo! Groups Links
>    * To visit your group on the web, go to:
>    * 
> <http://groups.yahoo.com/group/Repeater-Builder/>http://groups.yahoo.com/group/Repeater-Builder/
>  
>
>    *
>    * To unsubscribe from this group, send an email to:
>    * 
> <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] 
>
>    *
>    * Your use of Yahoo! Groups is subject to the 
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
     [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


Reply via email to