Robert, Have you looked at the audio level coming out of the repeater receiver? I sometimes find the Mastr II and Exec II receiver audio output level pot intermittent or "dirty" which results in what you are experiencing. This Pot is located in the shielded compartment by the detector. This sets the audio output level going to the Volume Unsquelched High output.
John, K7JL Message: 11 Date: Thu, 25 Mar 2004 07:41:29 -0500 From: Robert W Burton <[EMAIL PROTECTED]> Subject: audio problems We have a hub repeater within our system that is having a problem. (http://www.georgiaskywarn.com ) Every so often the audio level just drops. No distortion, no intermod mixing that we can hear...the level of the audio just gets softer. No loss of signal either. The repeater is located on a tower that has 2 fm radio stations running lots of power on it. One of the radio stations has caused some problems with the local school and neighboors who are just underneath it's footprint. Problems with them getting into t.v. , intercoms, etc. This problem will just "happen" then fix itself. There are several pagers, cell phone and one digital t.v. (I think there still in business....if your in the Atlanta area it's Bellsouth's thing with the dishes in the tops of trees....it's really too funny to see these things ;-) on this same tower. The repeater is a MCC converted GE Master Exec II with a SCom7 controller. Thanks, Robert Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
