Hi Ken, well it would be hard for me to make an offer, let me tell you what I am attempting to do. I have two repeaters, one on 440 and one on 2 meters, and am using an RLC2 controller. I want to be able to remove the controller from the 440 machine, which is a phone patch deal and tie it into the RLC2 controller. The receiver that is on the 440 machine is a Uniden radio, for which we pulled the de-emphasized audio from. Then we used a COR, which actually is nothing more than a voltage drop. For what ever reason, this voltage does not drop enough to key the transmitter in the RLC controllers, at which time I attempted the switch was using and RLC4. At this time I do not want to use a PL deck on it, which would take care of the core problem, but then limits the open repeater. Other bad part of this is, I have not worked with electronics, or done any service work for about 15 yrs, as I took a career change to the medical field. So most of what I had learned, due to that CRS thing that comes with age, is gone. I really don't want to put a bunch of money into this machine, as I have already spent over $2000.00 putting together the 2 meter repeater, for which I most likely won't use a whole lot. You might say it's a donation to the county to have thier first 2 meter repeater. So how easy would this be to hook up and make run with this controller, and what kind of price range would we be looking at.
Thanks. Mathew ----- Original Message ----- From: "Ken Arck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, March 28, 2004 4:02 PM Subject: Re: [Repeater-Builder] WTB: 440 Mhz Receiver with COR > At 03:45 PM 3/28/2004 -0800, you wrote: > >Just something with good sensitivity and the cor. It's really a low key > >repeater. > > <--I have a Spectra Tac receiver (that's a receiver from a Micor), > mid-split with channel element and squelch gate card. It's in a rack mount > and all you need do is supply it 9.6 and 13.8 volts. It doesn't have an > audio/squelch board but with the squelch gate card, you don't need that > anyway. > > Make offer :-) > > Ken > -------------------------------------------------------------------------- ---- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
