> The voltage at the tap point is about 7 volts, when keyed it drops to
> about
> .5 volts, just not enough to get it to key the controller. I looked
for
> other sources in the radio, nothing would drop to zero volts.
Try putting a small silicon diode or two in series with the wire. That
should drop you about .6 volts each or so and take you more to 0.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
