I use UG-141 and then solder on SMA nut..both from Down-East Microwave. Then a SMA to Type-N bulkhead (female on both sides) adapter to exit the case. I re-plumbed both TX and RX this way. Worked very well in a Low-Band Mitrek.
mike -----Original Message----- From: David Schornak [mailto:[EMAIL PROTECTED] Sent: Monday, April 05, 2004 10:42 AM To: [email protected] Subject: [Repeater-Builder] so239 shields does anyone now where to get an so-239 with a shield or just a shield for an so-239? this is the shield that covers the back side up where the coax is connected to the connector. what is the best type of coax to use inside of a micor for installing a receive antenna? Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
