The shields for RG-58 size cable are a UG-177. A UG106 is for RG213 size cable.
They can be seen here: http://www.webb.co.za/01-connectors/0106-shrouds.htm Do an internet search by these numbers for a place to buy them. I.E. Digikey, mouser, newark, etc. Scott M. Scott Zimmerman Zimmerman Electronics Amateur Radio Call N3XCC 612 Barnett Road Boswell, PA 15531 ----- Original Message ----- From: "skipp025" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, April 05, 2004 12:21 PM Subject: [Repeater-Builder] Re: so239 shields > David, > > The rear mount SO-239 "hoods" are hard to find. I believe the last > place I bought them was DigiKey. Be careful to order the right size > hood. I was not able to find/buy the RG-8 size, so I just stocked up > on the smaller sized and cut them with a fine blade saw for the > larger coax. > > One of the RG-142/400 teflon type coax cables work pretty well inside > the cabinet. RG-214 also works, but it's large and unwieldy. > > Cheers, > skipp > > www.radiowrench.com > > > > "David Schornak" <[EMAIL PROTECTED]> wrote: > > does anyone now where to get an so-239 with a shield or just a > shield for an > > so-239? > > this is the shield that covers the back side up where the coax is > connected > > to the connector. > > what is the best type of coax to use inside of a micor for > installing a > > receive antenna? > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
