AES has them.
Tom...
KC9FOZ
----- Original Message -----
From: "skipp025" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 05, 2004 11:21 AM
Subject: [Repeater-Builder] Re: so239 shields
> David,
>
> The rear mount SO-239 "hoods" are hard to find. I believe the last
> place I bought them was DigiKey. Be careful to order the right size
> hood. I was not able to find/buy the RG-8 size, so I just stocked up
> on the smaller sized and cut them with a fine blade saw for the
> larger coax.
>
> One of the RG-142/400 teflon type coax cables work pretty well inside
> the cabinet. RG-214 also works, but it's large and unwieldy.
>
> Cheers,
> skipp
>
> www.radiowrench.com
>
>
> > "David Schornak" <[EMAIL PROTECTED]> wrote:
> > does anyone now where to get an so-239 with a shield or just a
> shield for an
> > so-239?
> > this is the shield that covers the back side up where the coax is
> connected
> > to the connector.
> > what is the best type of coax to use inside of a micor for
> installing a
> > receive antenna?
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
