At 05:08 PM 5/3/04 +0000, you wrote:
>Wondering what type of radios are available for use as voters for a
>repeater. I am told that it is best if all the receivers are the
>same for the voters, my plans are to use all micors of the same
>chassis. Is this true as well for the transmitters? What my plans
>are is to use the Doug Hall Voter system, running three voters from
>146.325 receive to a transmit frequency on 902 Mhz, if this is
>possible. What brick walls am I heading into. Thanks.
>
>Mathew
The comment about the receivers that need to be the same
actually extends to the path between the voter chassis and
the user - the RXs and the entire path from the RXs to the
voter. The goal is that the voter sees the users audio from
multiple locations and the only difference between them is
the different RF paths.
There are a couple of voter related articles at
www.repeater-builder.com - use the search function for "voter"
Mike WA6ILQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
