More details needed.What is the repeater? WHat frequencies are you trying to
use? If running the same band on a remote,you will need lots of antenna
separation. We use 140' of vertical separation. You also will not be able to
work frequencies close to your own without filters of some type.Some close
frequencies will be impossible to use. It all depends on the frequency
separation vs. antenna/filter isolation.
----- Original Message -----
From: w9mwq <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, May 21, 2004 9:11 PM
Subject: [Repeater-Builder] Remote Base Project
> Question is, I a am putting a remote base on my RLC2 controller with
> the RBI-1 interface. All is working ok. What I need some ideas on
> is how to keep the transmitter from killing the receiver of the
> repeater? What can be done to isolate the two radios. The radio is
> a Kenwood TM-731 and is running only 5 watts. What are some
> thoughts. Thanks.
>
> Mathew
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
