I agree with Kevin. Try it. Keep your remote base TX output as low as you can. Try always to work with repeaters and users with "big" signals. It amazing what a big signal can do to override desense.
Consider installing a flat, horizontal screen between the two antennas to try to get additional isolation. Use heliax for all cable runs and double shielded to all the radio equipment. You may be surprised what you can accomplish. Chuck WB2EDV ----- Original Message ----- From: "Kevin Custer" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, May 22, 2004 9:06 AM Subject: Re: [Repeater-Builder] Remote Base Project > Mathew Quaife wrote: > > >So then no real good way of doing it, is what i am gathering? > > > > Don't let other discourage you so much. Just because their experience > hasn't been a good one doesn't mean you should give up. > Try moving the antenna around (up/down - back/forth) while doing a link, > you may see quite a difference in a few feet or even inches. Same > principal as inching the car ahead at a stoplight to get your favorite > FM radio station in better. Use simple antennas for the remote base > like a small beam or a ground plane, and don't be afraid to experiment. > > Kevin > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
