I have one in a UHF 75-Watt MICOR repeater with the same problem. I've unsoldered the cover that has to come off, and on this particular one, the slugs are so frozen that the hex-head tool now won't fit anymore in the slugs - they've become rounded out and just can't be gripped with anything. So if anyone has another set besides the one David needs, I could sure use one, too. It will finish up another UHF Repeater - everything else works fine.
LJ Original Message: ----------------- From: David [EMAIL PROTECTED] Date: Thu, 3 Jun 2004 21:41:39 -0400 To: [email protected] Subject: [Repeater-Builder] help I need I have a micor base/repeater station and the second bpf the one attached to the tripler needs to be tuned problem is that the tuning screws are epoxied in and I can't clean them up so I need a new one but don't know where to get one can someone help me out??? Yahoo! Groups Links -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
