Larry, Have you tried an easyout? It has worked in the past.
73
AC0Y
--- In [email protected], "[EMAIL PROTECTED]" <[EMAIL
PROTECTED]>
wrote:
> I have one in a UHF 75-Watt MICOR repeater with the same problem.
I've
> unsoldered the cover that has to come off, and on this particular
one, the
> slugs are so frozen that the hex-head tool now won't fit anymore
in the
> slugs - they've become rounded out and just can't be gripped with
anything.
> So if anyone has another set besides the one David needs, I could
sure use
> one, too. It will finish up another UHF Repeater - everything else
works
> fine.
>
> LJ
>
>
> Original Message:
> -----------------
> From: David [EMAIL PROTECTED]
> Date: Thu, 3 Jun 2004 21:41:39 -0400
> To: [email protected]
> Subject: [Repeater-Builder] help I need
>
>
> I have a micor base/repeater station and the second bpf the one
attached to
> the tripler needs to be tuned problem is that the tuning screws
are epoxied
> in and I can't clean them up so I need a new one but don't know
where to get
> one can someone help me out???
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
> -------------------------------------------------------------------
-
> mail2web - Check your email from the web at
> http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
