Thanks Charles, any idea what kind of price one might be looking at for the harness? Know of any that were bought. We was just going to attempt to build one with RG-11 coax. If it is cheap enough to buy one, just may do that.
Mathew ----- Original Message ----- From: "Charles Miller" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, June 14, 2004 7:07 PM Subject: Re: [Repeater-Builder] DB224 Element Impedance Info Needed > If memory serves me right, they are 100 ohms each, but I will check my > records to be sure. > > If you only need to replace the harness, I would buy a new harness from DB. > They make replacement harnesses, and they also make the elements for the > newer style only. > > You will save yourself a lot of time and trouble if you but one. > > Charles Miller, WD5EEH > > ----- Original Message ----- > From: "w9mwq" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, June 14, 2004 8:20 PM > Subject: [Repeater-Builder] DB224 Element Impedance Info Needed > > > > Can anyone tell me the impedance of the elements on a DB224 > > Antenna. I need to rebuild a phasing harnass for an antenna that > > has been hit by lightning. Any help would be appreciated in this > > endeavor. > > > > Mathew > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
