Thanks Chuck, got the same answer twice, so must be 100 Ohms. Top half of the harness appears to be ok, bottom half not so good, going to attempt to build a harness. Unless the price of a new one is cheap enough, might just buy one.
Mathew ----- Original Message ----- From: "Chuck Kelsey" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, June 14, 2004 6:35 PM Subject: Re: [Repeater-Builder] DB224 Element Impedance Info Needed > I've always been of the understanding that they are 100 ohms each. > > Chuck > WB2EDV > > > > ----- Original Message ----- > From: "w9mwq" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, June 14, 2004 9:20 PM > Subject: [Repeater-Builder] DB224 Element Impedance Info Needed > > > > Can anyone tell me the impedance of the elements on a DB224 > > Antenna. I need to rebuild a phasing harnass for an antenna that > > has been hit by lightning. Any help would be appreciated in this > > endeavor. > > > > Mathew > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
