Daron- In my situation my radio desk will be about 4 feet from the breaker
box, which is about 2 feet from the power meter outside where the AC feed for
the house is. My ground connection was going to be immediately below the
breaker box & AC feed. My connection to the AC ground system is obviously
right there at that point.
Since I work in broadcasting, that is where I got the idea of using copper
strap.
"Daron J. Wilson" <[EMAIL PROTECTED]> wrote:
SNIP
> ground. I would consider bonding the two ground rods to the utility
> ground for the house. I'd have to look to be sure, but I believe it is
> code that any additional ground rod be bonded to the main ground system.
> While you are talking about doing that in the house with a run to the
> breaker panel, I believe it may be more correct to bond them outside
> around the perimeter of the house.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
