Re: [Repeater-Builder] grounds & cadwelding

[Daniel Fargo]

John,           Here is some information from Polyphaser on grounding and bonding Amateur radio stations you might find helpful.   http://www.polyphaser.com/ppc_PEN1016.asp   Dan F. KB3EMH ----- Original Message ----- From: JOHN MACKEY To: Repeater-Builder@yahoogroups.com Sent: Monday, June 14, 2004 10:07 PM Subject: [Repeater-Builder] grounds & cadwelding I am getting ready to install a ground system in my house.  This is to support my radio equipment for HF and V/UHF. My plan was to use copper 6" strap running from my bench about 8 feet to two ground rods outside, each about 8 feet apart.  I then wanted to cadweld the copper strap to the ground rods.  Inside, I am going to connect the ground strap to a ground cable running to the breaker box. Anyone have any better ideas or suggestions?  Anyone have any experience using cadwelding to bond ground strap to a ground rod? thanks     Yahoo! Groups Links <*> To visit your group on the web, go to:      http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to:      [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to:      http://docs.yahoo.com/info/terms/   Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.