Hi John: Before you do anything, let me suggest you read several of the Polyphaser Engineering Notes, specifically PEN1016. These may be found at:
http://www.polyphaser.com/ppc_pen_home.asp Good luck. 73, Russ WB8ZCC ----- Original Message ----- From: "JOHN MACKEY" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, June 15, 2004 1:07 AM Subject: [Repeater-Builder] grounds & cadwelding I am getting ready to install a ground system in my house. This is to support my radio equipment for HF and V/UHF. My plan was to use copper 6" strap running from my bench about 8 feet to two ground rods outside, each about 8 feet apart. I then wanted to cadweld the copper strap to the ground rods. Inside, I am going to connect the ground strap to a ground cable running to the breaker box. Anyone have any better ideas or suggestions? Anyone have any experience using cadwelding to bond ground strap to a ground rod? thanks Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
