There are no other markings on the card. the only marking that is not with a control pot is REMOTE up at the top so im thinking it was a dc or tone remote one person says it is used for a autopatch.Im not sure just wanting to find out forsure what the purpose of the card is.
I have been having some problems tuning the receicer on it also the rx'er is a 9R93D uhf receiver the pages on alignment. well i guess the main problem is that there must be a extender card for the rx and tx units. it was factory tuned to 448.0928Rx and i got new rocks for it fro 443.1000,. so i hope it will perform well. I have the standard tone and ctcss filter card and repeater card installed. so that should be enough. Have you gott a 90 series in operation? "B" ----- Original Message ----- From: "ve3hxp" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, July 27, 2004 9:20 PM Subject: [Repeater-Builder] Re: Glenayre WR 90 series > --- In [email protected], "brent" <[EMAIL PROTECTED]> wrote: > > Is there anybody that has any info on a Glenayre WR 90 series > station > > (repeater) UHF > > > > Looking for some on one of the control cards that is marked on the > back side > > C61-4B the front is marked up with > > Remote, RX, TX, DIAL controls. the board also has a daughter board > attached > > to it marked C63-4B > > thanks > > "B" > > > > --- > > [This E-mail scanned for viruses at TNWEB LLC] > > Hi, Are there other marking on the front of the board? Like RTC54, > RCL54, RTB, RTL etc, or do you have a pix? The markings don't ring a > bell with me. > > Thanks > Sean > VE3HXP > > > > > > > > Yahoo! Groups Links > > > > > > --- > [This E-mail scanned for viruses at TNWEB LLC] > > > --- [This E-mail scanned for viruses at TNWEB LLC] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
