--- In [email protected], "John J. Riddell"
<[EMAIL PROTECTED]> wrote:
"...Jeff, I always use a 6 DB, 50 ohm pad on my Sig. Gen. I think that
would be considered a termination....?
John VE3AMZ"
----- Original Message -----
From: "Jeff DePolo WN3A" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 03, 2004 12:49 PM
Subject: RE: [Repeater-Builder] Re: GE Master Pro
"...That's one problem with using lossy tees to check effective
sensitivity - the sig gen isn't terminated in 50 ohms..."
_______________________________________________________________
I have also started using a 6dB pad - I believe it does present a much
better match for the generator.
I believe if you look at the Motorola Interference Appendix document
[available on Repeaterbuilder.com] they have a diagram showing the
isolated 'T' effective sensitivity test procedure and they are showing
the use of the 6dB pad.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
