At 8/3/2004 09:49 AM, you wrote:
>Huh. You're right, I didn't do the math. That's one problem with using
>lossy tees to check effective sensitivity - the sig gen isn't terminated in
>50 ohms.
I don't think that matters as long as the sig. gen. output is pure 50 + j0
ohms. If it wasn't, the reactive termination would tune into the sig. gen.
but if the sig. gen. is 50 ohms the loss through the T should be fairly
flat. As long as you have that loss well characterized in a 50 ohm system,
I'm your uncle.
Bob
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
