Don't forget-Motrac and Micor cards are different! If you have Micor
cards, you can, with some patience and a good soldering iron, re-wire it
to work on the Motrac, but they are not pin-compatible. 'Course if you
have Motrac cards, then that's moot ;C}
Matt wrote:
> Thanks for the info. I have a spare Time Out Timer board too, in
> addition to a couple Squelch Gate cards, so I should have the cards
> I need for this. Extra cooling is definetly part of the plan too.
>
> The only other thing is, do you have any suggestions on the easiest
> way to get the receiver to stay active while the transmitter is
> keyed? Best place to make this mod? Any thoughts on that would be
> much appreciated. (Especially since I don't have a service manual
> for the unit!)
>
> Thanks,
>
> Matt
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
