be a lot simpler. A single E&M port talks to a radio just fine.
M=PTT, E=COR, and transformer couple the audio.
Mike
At 02:34 PM 9/27/04, you wrote:
If you want to run all these repeaters at the same site,
and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html.
A system could be set up for under $1200 that could control
up to 12 repeaters at the same site as well as link to other
sites with an app_rpt/Asterisk system.
Digium single port T1 Adapter card $500.00
Used 24 channel T1 FXS Channel Bank from E-bay $150.00
5 Telephone adapter boards $300 (kit form)
retired 600MHz PC with 20GB hard disk $200.00
>
> From: "Mr. Edgar McKinney" <[EMAIL PROTECTED]>
> Date: 2004/09/27 Mon PM 04:27:41 EDT
> To: [email protected]
> Subject: Re: [Repeater-Builder] Repeater Controller
>
> Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a
> 900 pluss a remote base.
>
> Ed
>
> Paul Guello wrote:
>
> > Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has
> > anything like that.Paul
> >
> > "Mr. Edgar McKinney" <[EMAIL PROTECTED]> wrote:
> >
> > Do they have a controller like the LINK's RLC-4?
> >
> > Ed
> >
> > Paul Guello wrote:
> >
> > > Have you checked out the inexpensive controller kits
> > > from NHRC? They may have more features than you need,
> > > but they are easy to build and small.
> > >
> > > http://www.nhrc.net/
> > >
> > > Paul, KB9WLC
> > >
> > > --- goreks2000 wrote:
> > >
> > > > Hello
> > > > I want to build a simple repeater controller to have
> > > > as a portable
> > > > repeater along wit my Motorola HT800 (407-435mhz)to
> > > > use on small
> > > > motor sports event but I don't find (I think I use
> > > > one HT800 as RX
> > > > and a mobile rig as TX ex yaesu FT7800)
> > > > Any thing simple, most controllers have DTMF or CTSS
> > > > in it
> > > > The only thing I need is PTT opening (maybe 1750
> > > > hz )
> > > > And a Audio isolation/amplifier if necessary
> > > > Can any one help me with building instructions
> > > > Manny thanks and 73
> > > > G�ran SM1YCE
> > > > Sweden
> > > >
> > > > Sorry for my bad spelling I hope you understand any
> > > > way
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > > [EMAIL PROTECTED]
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > _______________________________
> > > Do you Yahoo!?
> > > Declare Yourself - Register online to vote today!
> > > http://vote.yahoo.com
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> > -----------------------------------------------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail is new and improved - Check it out!
> >
> >
> >
> >
> >
> >
> > ---------------------------------------------------------------
> > Yahoo! Groups Links
> >
> > * To visit your group on the web, go to:
> > http://groups.yahoo.com/group/Repeater-Builder/
> >
> > * To unsubscribe from this group, send an email to:
> > [EMAIL PROTECTED]
> >
> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> >
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base.
Ed
Paul Guello wrote:
Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul
"Mr. Edgar McKinney" <[EMAIL PROTECTED]> wrote:
- Do they have a controller like the LINK's RLC-4?
- Ed
- Paul Guello wrote:
- > Have you checked out the inexpensive controller kits
- > from NHRC? They may have more features than you need,
- > but they are easy to build and small.
- >
- > http://www.nhrc.net/
- >
- > Paul, KB9WLC
- >
- > --- goreks2000 wrote:
- >
- > > Hello
- > > I want to build a simple repeater controller to have
- > > as a portable
- > > repeater along wit my Motorola HT800 (407-435mhz)to
- > > use on small
- > > motor sports event but I don't find (I think I use
- > > one HT800 as RX
- > > and a mobile rig as TX ex yaesu FT7800)
- > > Any thing simple, most controllers have DTMF or CTSS
- > > in it
- > > The only thing I need is PTT opening (maybe 1750
- > > hz )
- > > And a Audio isolation/amplifier if necessary
- > > Can any one help me with building instructions
- > > Manny thanks and 73
- > > G�ran SM1YCE
- > > Sweden
- > >
- > > Sorry for my bad spelling I hope you understand any
- > > way
- > >
- > >
- > >
- > >
- > >
- > >
- > >
- > > Yahoo! Groups Links
- > >
- > >
- > > [EMAIL PROTECTED]
- > >
- > >
- > >
- > >
- >
- >
- > _______________________________
- > Do you Yahoo!?
- > Declare Yourself - Register online to vote today!
- > http://vote.yahoo.com
- >
- >
- > Yahoo! Groups Links
- >
- >
- >
- >
- Yahoo! Groups Links
- <*> To visit your group on the web, go to:
- http://groups.yahoo.com/group/Repeater-Builder/
- <*> To unsubscribe from this group, send an email to:
- [EMAIL PROTECTED]
- <*> Your use of Yahoo! Groups is subject to:
- http://docs.yahoo.com/info/terms/
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
