The isolator might fix the problem. The second harmonic of the 146.7 is 293.4. If you subtract 147.3, it comes up right on your input, 146.1.(Classic 2A-B intermod) Same thing is going on with the other freqs. Could also be mixing in your RX, or about any other non-linear spot between the two towers.
Joe --- Q <[EMAIL PROTECTED]> wrote: > > Trying to troubleshoot an intermod??? problem > between two repeaters. The > 146.10/.70 repeater's receiver gets blasted by the > 147.90/.30 transmitter > but only when they are both transmitting. Yes,the > transit freqs are 600khz > apart and they are only 5 miles apart. Would a > circulator help this problem? > Also have similar problem between the 146.07/.67 and > the 147.87/.27 > repeaters when they are both keyed up. Ideas? > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
