By that statement, you are saying that the 146.670 repeater is
coordinated? If so, what is the callsign and location? eMail me
privately if you wish.
Joe M.
Q wrote:
>
> Unfortunately,only the 147.30 is un-coordinated. Now for the
> politics of the hobby...
>
> ----- Original Message -----
> From: Eric Lemmon <[EMAIL PROTECTED]>
> >
> > As another poster mentioned, the coordinating body should not allow
> > such I must assume
> > that one of each conflicting repeater pair is uncoordinated.
> >
> > 73, Eric Lemmon WB6FLY
> >
> > Q wrote:
> >
> > Trying to troubleshoot an intermod??? problem between two repeaters. The
> > 146.10/.70 repeater's receiver gets blasted by the 147.90/.30
> > transmitter but only when they are both transmitting. Yes, the transit
> > freqs are 600 kHz apart and they are only 5 miles apart. Would a
> > circulator help this problem? Also have similar problem between the
> > 146.07/.67 and the 147.87/.27 repeaters when they are both keyed up.
> > Ideas?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
