Hello Dave - I had a couple of these, if you remove the top insulator they will tune right on up to 148 and above to where I do not know but I think they are pass only. Correct me if I'm wrong. I couldn't give them away so after disassembly I got more from the local scrap yard for the copper than any one had offered for the cans. They are rated at 3 KW continous and are solid copper. The inside tuning device is all silver plated / 3" with fingerstock
Dave // N�ATH ----- Original Message ----- From: "Dave" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, October 19, 2004 12:04 PM Subject: [Repeater-Builder] GE VHF Cavity identification > > > I have a few of these "barrels" but I cannot find any model or part > number on them. The only info I have is a tag ties to the top that > says 106 - 136Mhz. > > I'm wondering if these are notch or pass/reject or whatever cavities. > > Here is a 44kb picture of what I have. > > http://www.kmcnet.net/Pictures/can.jpg Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
