I wish I could find some of these cheap...I need some! ----- Original Message ----- From: N�ATH <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, October 19, 2004 9:22 PM Subject: Re: [Repeater-Builder] GE VHF Cavity identification
> > Hello Dave - I had a couple of these, if you remove the top insulator they > will tune right on up to 148 and above > to where I do not know but I think they are pass only. Correct me if I'm > wrong. I couldn't give them away so after disassembly > I got more from the local scrap yard for the copper than any one had offered > for the cans. They are rated at 3 KW continous > and are solid copper. The inside tuning device is all silver plated / 3" > with fingerstock > > Dave // N�ATH > > > ----- Original Message ----- > From: "Dave" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, October 19, 2004 12:04 PM > Subject: [Repeater-Builder] GE VHF Cavity identification > > > > > > > > I have a few of these "barrels" but I cannot find any model or part > > number on them. The only info I have is a tag ties to the top that > > says 106 - 136Mhz. > > > > I'm wondering if these are notch or pass/reject or whatever cavities. > > > > Here is a 44kb picture of what I have. > > > > http://www.kmcnet.net/Pictures/can.jpg > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
